Block Joining Mortar

Globcon Bond AAC Block Joining Adhesive is a premix high graded polymer modified thin bed masonry mortar for joining & laying of AAC block, flyash brick, concrete blocks or hollow blocks and clay bricks.

Globcon Bond is formulated for using with water to produce self curing and high bond strength thin bed mortar. It is a formulation of blend of polymers, hydration retainers, cement, minerals additives and graded fine sands. Globcon Bond AAC Block Joining Adhesive is in compliance with c-1660-09-ASTM standards.



Technical Parameters

SPECIFICATION BLOCK JOINING MORTAR
Appearance Grey powder
Potlife >30 min
Tensile splitting strength >.34 N/m2
Compressive at 28 days >5.0 N/mm2
Wet density 1700-1800 kg /m3
Dry density 1300-1400 kg /m3
Coverage 170 sq ft /4o kg bag(cons.joints of 2-3mm
Hard dry 24 hours
Storage condition / Self time 6 Months from date of production if stored properly in original unopened, sealed and undamaged packaging in dry and cool condition
Applications AAC Blocks, Concrete Blocks, Fly Ash Brick, Clay Brick, Hollow Block

Benefits and key Features

SELF CURING
It eliminate the need of curing which saves critical resources like water.
ENVIRONMENTAL FRIENDLY
Helps in reducing carbon and does not require excess water for curing.
MINIMIZE SHRINKAGE & SEEPAGE
It is a formulation which minimize crack shrinkage & water ingress.
SEMI PREMIXED
Premixed and ready to use, only water is to be added as per the mixing ratio.
IMPROVED WORKABILITY
Due to polymeric & minerals additives, results in good spreadable properties.
COST EFFECTIVE
Applied in less quantity resulting into zero wastage.
HIGH BONDING
Long lasting and strength can be achieved above 3mm thickness.
LESS STORAGE
Ready to mix product thereby eliminating need to bulk storage.

“Precise Construction is the Beauty of Building,
We Help to Make it Possible”


download brochure

Block Joining Mortar